Tag: Woodworking

  • Workspace – In Progress

    I always wanted to have one of those cool workspaces you see in the stock photos (like the one on my site).  But if I’m on my laptop, I’m usually downstairs and slouching on my sofa, in front on a TV…  But I still wanted to try to make a decent workspace in the guest room so maybe someone will use it.

    I went to my favorite wood shop, Austin Hardwoods, in Santa Ana.  I looked through a bunch of black walnut, teak and other woods.  I was thinking of how I’d have to glue some boards together without owning a jointer or planner or even knowing how to use either tool.  I was a little discouraged, but on my way out, I found this board.

    It’s Burmese Padauk – at least that’s what the sticker says.  I’ve never heard of it before so I Googled it and liked what I saw.  This piece was pretty expensive and I’m not sure how it looks to most people, but I envisioned it looking great.  There was something that told me to buy it, so I listened – something I’ve been trying to do more of too.

    I used a hand planner that caused more problems.  I’m not very skilled with these and it took out some big chunks of wood here and there.  So, I sanded it a lot.  I think something like 100/120/180/220/400 grit sandpaper.

    I decided to try this Sam Maloof finish.  People say you can make the same thing for less using a 1/3 of this, a 1/3 of that and 1/3 of something else I forgot.  It’s a little pricy too, but this quickly became my favorite finish I’ve used.  It gave the wood a nice color, brought out the grain, and provided a layer of protection that’s very flat.

    I also rubbed it down with Renaissance wax that has great reviews on Amazon.  I haven’t been blown away by this stuff, but I haven’t used it on much else either.

    I’m very pleased with how it turned out though:

    And the workspace pics are never complete without a Mac:

  • Workspace – Speakers

    My last post was about the desk I made (really more of finishing than making).  Underneath the desk are some speakers I’ve been refinishing too.  That’s taken me over two years, but they’re finally complete.

    My wife and I like to go to thrift stores to look for things we can fix up.  I found these KLH 17 speakers a few years ago and bought them for $20.  They were in pretty rough shape and one of the tweeters was blown.

    I ended up on forums, which seem to be the best source of information on the internet.  I bought a replacement tweeter on eBay as well as a sealant to repair the seal around the woofer.  I also read that the capacitors (or something) was likely to be broken so I ordered some parts and followed a step-by-step guide to replace the crossovers (thanks again, internet).

    They sat like this for over year until I started working on the desk.  I ended up refinishing the cabinets at the same time and it was much faster this way.

    I’ve also bought some speaker fabric on Etsy before, but I found the same material for much cheaper somewhere else that I forgot too.

    I’ve also been experimenting with some mini-amps on Amazon.  I used a Lepai on another project, I tried a Topping TP22, but I settled on an SMSL SA50 because it has more power and sounds great with these speakers.

    I’ll have to make some stands to get them off the ground next.  I have plans to use some of the scrap Ipe wood I used to build our fences but this will probably take me another year to get to.

     

  • Another Planter Box

    I made this planter box years ago but I never used it until last year.  I found this great Bonsai tree at Upland Nursery in Orange and it fit pretty well in here.

    I made this back when I made this dog house.  I didn’t own a saw at the time, so I made sure to cut this wood while I was borrowing my brother-in-law’s saw.

    It’s cheap redwood from Home Depot and I think it’s golden yellow stain.  Had I made it recently, I probably would’ve tried to dye the wood with some red and then apply the stain to give it more depth.

  • Front Yard

    We picked our yard as our big project for the year. And by we, I mean my wife.  I wanted to work on other things inside the house, but I started digging up the side yard and that lead to this.  Ironically, the first patch that I dug up is the one patch that I haven’t done anything with yet.

    This is our new front yard after removing the old sod, digging out two huge tree roots, numerous over-grown plants, removing the old sprinkler system, installing a new one, adding low-voltage wiring and lighting, a french drain, pavers, new gutters around the house, a rain chain, new power outlets and a security camera. Along with all of the new stuff – Ipe wood fence, Mexican beach pebbles, mondo grass, two more Japanese maples, decorative ground cover and decomposed granite.

    It really was the biggest project we’ve done and I did a lot of it by myself.  And we’re still not done because the red pavers are placeholders for some large stones.  But we’ve received lot of compliments, it’s very low maintenance and we don’t use much water so it was all worth it.

    Front Yard

    When we first moved in, we hired someone to cut down three trees in the back.  Although, there were two huge maple trees in the front yard that were cut down but the roots weren’t removed.  We had some really lumpy grass that was hiding it all.

    We also hired a crew of 4 guys that worked on removing the tree stumps and roots.  They also tilled and leveled the yard, but they somehow missed this one.  This took me a long time to dig out, but I kept at it and did it piece by piece. Tree stump

    Once the roots were gone, I dug the fence post holes for our fence.  We live in an area that was once part of the ocean, so once you dig 6 inches down, you get to this rock hard sand.  Digging the post holes was such a a pain, but not nearly as hard as removing the stump.

    Front Gate

    This is the fence I made from Ipe wood that I ordered through AdvantageLumber.com.  I haven’t ordered that much wood before so I can’t compare it to anything.  I’d say that the 8′ boards were mostly great but there were a handful that I didn’t want to use.  Although, what I thought were some of the ugliest boards actually came out as the best ones when I applied the Mesmer’s oil.  And the 8′ boards were pretty straight but the 12′ boards I used for the side yard fence were pretty warped.  So overall, I was happy with the wood, but it could’ve been a little better too.

     

  • Side Yard Project

    When we bought our house a few years ago, there was a big shed in the side yard.  It might’ve been useful, but it was placed right in front of a sliding door and was visible from our living room.  We have lots of projects to do, but my wife wanted to work on the yard and this is were it started.

    I started working on the yard about a year ago and I took down the shed and moved it to my in-law’s farm, which was a quite an ordeal.  I actually worked on the front yard next, but ended up making a decorative fence, planted a Japanese maple tree and filled it with some rocks.

    I also tore out our old irrigation system, put in a new one along with some low-voltage lighting.  I’ve never done any of those things so there was a lot to learn, but it’s all worked out pretty well so far.

    side yard

    side yard night

    The wood is called Ipe and I bought a bunch of it from Advantage Lumber to make this fence and another one in the front yard.  I had the idea of buying 12′ boards instead of the standard 8′ boards for this fence so I wouldn’t see a seam.  But I discovered that the 12′ boards have a lot more curves and warping.  It was a lot harder to work with and I don’t think I would’ve made the same choice if I was making it again.

    The rocks are 1/2″ – 1″ black Mexican beach pebbles.  I spent a lot of time at the specialty builder supply store looking at rocks until I found these.

  • A Bigger Shelf

    My oldest son loves garbage trucks and also started branching out to construction vehicles and fire trucks.  I bought him the orange Bruder garbage truck when we moved as a gift for being so good during the transition.  He played with it for years and still does from time to time.

    He ended up getting a bunch more from mom, grandma and his aunties and uncles.  They’re so big so I had to make a shelf just for his trucks!

    Truck Shelf

  • Mid-Century Inspiration

    I had some time off over the holidays and managed to finish a media console I’ve been working on. I’m not sure how I feel about this one. On one hand, it’s probably the nicest thing I’ve made but on the other hand, I see all the stupid mistakes I made along the way. I was able to hide a lot of them and it works well in our space so it ended up ok.

    I used a walnut plywood that I got from Austin Hardwood in Santa Ana. I really wanted to do bevel cuts for the edges, but I don’t have a table saw or a router so I ended up buying a Makita track saw. It works great and makes super clean cuts so long as everything’s clamped down properly (stupid mistake #1).

    Since it’s plywood, I covered the edges with veneer edge banding. It was my first time using it, but it’s really easy to do and it’s actually kind of fun.

    I wanted a dark walnut color and I tested out a bunch of stains and oils and ended up using Watco Danish Oil (Dark Walnut). I liked how it brought out the grain and it’s really easy to apply. Although, it wasn’t quite dark enough so I added a light coat of Old Master’s Black Walnut gel stain and finished it with 4 coats of General Finishes Arm-R-Seal satin.

    I sized it to go along with a free TV we got from the neighbors and to also fit a vintage receiver. This also became an interest of mine, so I picked up a vintage Yamaha CR-420 receiver. I honestly chose it mostly because of the aesthetics, but it sounds really clean for a lower powered, compact unit. I paired it with Micca MB42x speakers and I’m really impressed with these too. I feel like buying some more to replace a 5.1 setup in the living room, but we hardly watch anything that’s not on Disney Jr and if we do, it’s usually with it on mute with the subtitles on!

    Media Console Media Console Media Console Yamaha CR-420

  • Vintage Speaker Dock

    In between painting, installing baseboards and replacing all of our 30 year old electrical outlets and switches, I worked on something more fun. My wife seems to listen to music on her iPhone so I thought I’d make something better for her.

    We also like mid-century design so I found some old speakers at Goodwill and made them into an iPhone speaker dock.

    Speaker Dock

    Speaker Dock

    I used a $20 Lepai amp and got some vintage Realistic Minimus speakers.

    I later picked up some Bose tulip speaker stands, but they are a little too big. I might have to take the stands back if I ever get around to refinishing my KLH 17s.

    It came out pretty well and sounds great, but I took some more terrible pictures and didn’t fix the cords…

    Speaker Dock

  • Teak Bench

    I found this teak bench at TJ Maxx.  It wasn’t the greatest but the price was right and I thought I could make it a little better.  This is probably grade-C teak so I didn’t feel bad if I completely messed it up.

    Teak Bench unfinished

    From my previous TJ Maxx purchase, I thought I could even out the sapwood with  a combination of dye and stain.  The hardest part about refinishing a piece is that I don’t have scrap wood to test with.  I ended up dying the underneath pieces a few times and sanding it off until I was reasonably happy with the results.

    Teak Bench

    It’s definitely not the greatest thing I’ve done, but it’s not the worst either.

  • Garage Space

    When we first moved into our house, I had a huge list of projects to work on but nowhere to do it.  So I claimed this corner of the garage and made it my own.

    This is when I gave in an bought a Makita 10″ mitre saw and started my cordless Makita collection.  I always have a hard time buying tools because I’m worried I won’t use them, but I’ve ended up making really good use of all of these tools and they’re a joy to use.

    My first project was to make this workbench so I had a place to work on the next project.  I tried using the plans found in the Family Handyman Magazine, which is great by the way.  It was the only magazine I subscribed to, but I let it expire because of how many renewal notifications they send.  But anyhow, I had to cut it down half a foot because it was designed for giants, or at least people a lot taller than me.

    Garage Space

     

    This is what the wall looked like before I painted.  It was actually a lot worse before this because there were holes all over the place that I patched up.

    Garage Wall

    Being a dedicated USC alumnus, I had to use the official color for the wall.  Any Trojan knows this is cardinal (not just red) and gold.  Glidden made some officially licensed paints for a lot of schools and professional teams.  However, I know USC retains its own licensing and isn’t part of a lot of these deals, so I had to give in and go with the same but otherwise official colors of Stanford and LSU…

    Garage Wall USC

    I’m also not a very good painter so I used a Fathead for the Trojan logo.  But, I did learn a good technique for painting clean lines with tape from watching the Property Brothers on HGTV.  The tip was to paint the background color again around the tape line first.  This way, there will be some bleeding that you usually get, but it’s the same color as the background.  When it dries, you paint inside the lines like normal and you get a really sharp line.